Kit media
QL3D has just successfully passed the e2 and E2 certification (directive 72/245 / EEC in accordance with regulation No. 10) by UTAC on its serial port servers, WiFi access point and Atop Technologies WiFi client references: SW5002, AW5300 EW5300 and EW5302, allowing these products to integrate in the transport and logistics sectors.
EW5300: 802.11 g / b WiFi client.
The EW5300 wireless client is a bridge between the wireless network and the wired Ethernet network. The information transmitted by the wireless client is transparent to the hosts (IP network over wireless LAN) and equipment (Ethernet).
SW5002: two RS232 / 422/485, 10/100 Base Tx or WiFi 802.11 g / b serial port server.
The SW5002 is an industrial 10/100 Base Tx or WiFi 802.11 g / b serial port server, a gateway between the TCP / IP protocol via WiFi or wired connection and the RS232 / 422/485 interfaces. It allows almost any serial device to be connected to an existing or new wireless or wired network.
EW5302: WiFi client and / or two RS232 / 422/485 10/100 Base Tx or WiFi serial port server.
The EW5302 wireless client is a bridge between the wireless network, the wired Ethernet network and the RS232 / 422/485 interfaces. With one wired Ethernet port and two serial ports, these can be connected over an IEEE 802.11 g / b wireless network.
AW5300: WiFi 802.11 b / g access point / Bridge / WDS, with Fast Handoff.
The AW5300 uses an advanced algorithm for fast roaming of mobile stations that move within network coverage or frequently between multiple cells. It is suitable for the management of warehouses where forklifts or mobile carts move over large areas, using multiple wireless access points.
Find out more: www.ql3d.fr
